Ankit Gupta

1. Rai, Shardul; Tewari, Abhishek; Gupta, Ankit, A three-dimensional analysis of functionally graded thermoelectric devices considering convective heat losses, International Communications in Heat and Mass Transfer, 2026 (Q1).
2. Dagadi, Muralidhara; Singh, Jayeshwar; Sridharan, Adhindra Venkatraman; Gupta, Ankit; Singh, Manoj Kumar; Arora, Gaurav; Mavinkere Rangappa, Sanjay; Siengchin, Suchart, Mechanical property improvement of 3D-printed rPP and vPP through heat treatment and sustainable filament reuse, ACS Omega, 2026 (Q1).
3. Rai, Shardul; Sharma, Kshitij Kumar; Tewari, Abhishek; Gupta, Ankit, Influence of grain size and spatial volume fraction variation in ZnO based functionally graded thermoelectric devices, Scientific Reports, 2025 (Q1).
4. Vins, Benjamin; Gupta, Ankit; Suri, Samrath; Kishor, Abhishek; Chandrasekar, Aditya, Optimizing adhesion in fused filament fabrication-printed thermoplastic polyurethane–polylactic acid composites: Effects of penetration, overlapping, and void reduction, Journal of Materials Engineering and Performance, 2025 (Q2).
5. VS, Adhindra; Vins, Benjamin; Singh, Jayeshwar; Gupta, Ankit, Optimizing mechanical performance of 3D-printed PLA–TPU composites through heat treatment and geometric interlocking, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 2025 (Q2).
6. Kumar, Sourabh; Venkatramani, J; Gupta, Ankit, Bifurcation and synchronization analysis in a stall-flutter aeroelastic system under varying preset angles and frequency ratios, Scientific Reports, 2025 (Q1).
7. Sevak, Ravi; Arora, Gaurav; Gupta, Ankit, Finite element modeling and experimental characterization of wear in HDPE/CNT and PP/CNT nanocomposites processed via microwave-assisted compression molding, Industrial Lubrication and Tribology, 2025 (Q2).
8. Rai, Shardul; Tewari, Abhishek; Gupta, Ankit, A novel mathematical model for porosity-dependent thermoelectric properties in Al-doped ZnO functionally graded devices: Performance analysis and optimization, Journal of Electronic Materials, 2025 (Q2).
9. Sevak, Ravi Vijaykumar; Gupta, Ankit; Burela, Ramesh Gupta, Microwave-aided fabrication of natural fiber hybrid composites: A synergistic approach to mechanical, wear, and computational property analysis, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2025 (Q2).
10. Rai, Saurabh; Gupta, Ankit, Dynamic stiffness formulation for the vibration response of functionally graded nanoplates considering the neutral surface position with microstructural defects, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2025 (Q2).
11. Tripathi, Dheeraj; Venkatramani, J; Gupta, Ankit, Analysis of a nonlinear aeroelastic system with parametric uncertainties under dynamic stall condition, International Journal of Non-Linear Mechanics, 2025 (Q1).
12. Katiyar, Varun; Gupta, Ankit, Large-amplitude nonlinear vibrations characteristics of bi-directional functionally graded plate having microstructure defects in hygro-thermal environment, Structures, 2024 (Q1).
13. Singh, Dheer; Gupta, Ankit, Effect of circular and elliptical cutouts on the free vibration analysis of sandwich FGM plate under the elastic foundations, Mechanics Based Design of Structures and Machines, 2025 (Q1).
14. Rai, Saurabh; Gupta, Ankit, Dynamic response of sandwich functionally graded nanoplate under thermal environments and elastic foundations using dynamic stiffness method, Scientific Reports, 2024 (Q1).
15. Sevak, Ravi Vijaykumar; Burela, Ramesh Gupta; Arora, Gaurav; Gupta, Ankit, Microwave-assisted fabrication of high-strength natural fiber hybrid composites for sustainable applications: An experimental and computational study, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2025 (Q2).
16. Singh, Dheer; Rai, Saurabh; Gupta, Ankit, Vibration analysis of sandwich functionally graded material plate with cut-outs using artificial neural network technique, Thin-Walled Structures, 2024 (Q1).
17. Jhunjhunwala, P; Kishor, A; Burela, Ramesh Gupta; Singh, Rajesh; Gupta, Ankit, Finite element analysis and topology optimization of Ti-6Al-4V hip implant fabricated by laser powder bed fusion process, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 2025 (Q2).
18. Rajput, Mohit; Gupta, Ankit, Strain gradient based thermo-mechanical nonlinear stability behaviour of geometrically imperfect porous functionally graded nanoplates (FG-nP), Journal of Engineering Mechanics, 2023 (Q1).
19. Rai, Saurabh; Gupta, Ankit, A novel dynamic stiffness matrix for the nonlocal vibration characteristics of porous functionally graded nanoplates on Elastic Foundation with small-scale effects, The Journal of Strain Analysis for Engineering Design, 2024 (Q2).
20. Jhunjhunwala, Pranav; Gupta, Ankit, Effect of porosity on the quality of 3D printed structures, The International Journal of Advanced Manufacturing Technology, 2023 (Q1).
21. Kishor, Abhishek; Burela, Ramesh Gupta; Gupta, Ankit, Detailed design and analysis for additive manufacturing of topologically optimized and generatively designed Ti-6Al-4V hip joint implant, International Journal for Multiscale Computational Engineering, 2024 (Q2).
22. Katiyar, Varun; Gupta, Ankit; Tounsi, Abdelouahed, Microstructural/geometric imperfection sensitivity on the vibration response of geometrically discontinuous bi-directional functionally graded plates (2D-FGPs) with partial supports by using FEM, Steel and Composite Structures, 45, 621–640, 2022 (Q1).
23. Kumar, Y; Gupta, A, Size-dependent stochastic vibration response of compositionally graded nanoplates with system randomness using nonlocal continuum model with partial support, Archive of Applied Mechanics, 92(3), 1053–1081, 2022 (Q2).
24. Meena, Pavan; Kumar, M; Singh, Mayur; Shukla, D. K.; Burela, R. G.; Jhunjhunwala, P.; Gupta, A.; Pandey, C., Numerical Analysis of Different SUS304 Steel Weld Joint Configurations Using New Prescribed Temperature Approach, Transactions of the Indian Institute of Metals, 75, 1649–1668, 2022 (Q2).
25. Jhunjhunwala, P.; Taraphdar, P.; Gupta, A.; Pandey, C., Numerical Simulation of Temperature Fields and Residual Stresses in Multi-Pass Weld Using the Novel Prescribed Temperature Approach with Experimental Validation, Transactions of the Indian Institute of Metals, 75(10), 2713–2723, 2022 (Q2).
26. Singh, M. P.; Arora, K. S.; Gupta, A.; Kumar, R.; Shukla, D. K.; Jhunjhunwala, P., Experimental characterization of dynamic fracture toughness behavior of X80 pipeline steel welded joints for different heat inputs, Welding in the World, 2022 (Q2).
27. Singh, D.; Krishna, V.; Vemulapalli, P.; Gupta, A., Influence of circular cutouts and elastic foundation on vibration characteristics of porous sandwich FGM plates under hygro-thermal environments, Mechanics Based Design of Structures and Machines, 2022 (Q1).
28. Jhunjhunwala, P.; Kishor, A.; Burela, Ramesh Gupta; Singh, Rajesh; Gupta, Ankit, Finite element analysis and topology optimization of Ti-6Al-4V hip implant fabricated by laser powder bed fusion process, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 2022.
29. Rajput, Mohit; Gupta, Ankit, Thermo-mechanical nonlinear stability analysis of geometrically imperfect functionally graded plates with microstructural defects using logarithmic structure kinematics, ZAMM – Journal of Applied Mathematics and Mechanics, 103, 2023 (Q2).
30. Keval, S.; Rayapureddi, R.; Gurajala, J.; Raghavan, V.; Gupta, A., Revamping the vehicle protection system using next-generation car bumper to mitigate pedestrian fatality, International Journal of Crashworthiness, 1–20 (Q2).
31. Katiyar, Varun; Gupta, Ankit, Vibration response of a geometrically discontinuous Bi-directional Functionally Graded Plate Resting on Elastic Foundations in Thermal Environment with initial imperfections, Mechanics Based Design of Structures and Machines, 2021 (Q1).
32. Kumar, Yogesh; Gupta, Ankit; Tounsi, Abdelouahed, Size-dependent vibration response of porous graded nanostructure with FEM and nonlocal continuum model, Journal of Advances in Nano Research, 2021 (Q1).
33. Srikant, P.; Gupta, Ankit; Arora, Gaurav; Pathak, Himanshu; Burela, Ramesh G.; Bhatnagar, Anant S., Meso–macro-scale computational analysis of boron nitride nanotube-reinforced Aluminium and epoxy nanocomposites: A case study on crack propagation, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 235, 293–308, 2021 (Q2).
34. Bhatnagar, Anant S.; Gupta, Ankit; Arora, Gaurav; Srikant, P.; Burela, Ramesh G., Mean-field homogenization coupled low-velocity impact analysis of nano-fibre reinforced composites, Materials Today Communications, 26, 102089, 2021 (Q2).
35. Gupta, Ankit; Krishna, Vijay; Boddu, Venkat; Vemulapalli, Pavan; Unnava, Narendra; Agrawal, Brahma Nand, Geometric/microstructural imperfection sensitivity in the vibration characteristics of geometrically non-uniform functionally graded plates with mixed boundary conditions, Mechanics Based Design of Structures and Machines, 2021 (Q1).
36. Bansal, Gaurav; Gupta, Ankit; Katiyar, Varun, Influence of geometric discontinuities and geometric/microstructural defects on the temperature-dependent vibration response of functionally graded plates on elastic foundation, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42, 536, 2020 (Q2).
37. Bansal, Gaurav; Gupta, Ankit; Katiyar, Varun, Vibration of porous functionally graded plates with geometric discontinuities and partial supports, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 234, 4149–4170, 2020 (Q2).
38. Rajput, Mohit; Gupta, Ankit, Microstructure/geometric imperfection sensitivity on the thermo-mechanical nonlinear stability behavior of functionally graded plates using four variable refined structural kinematics, The Journal of Strain Analysis for Engineering Design, 2020 (Q2).
39. Gupta, Ankit; Talha, Mohammad, Influence of micro-structural defects on post-buckling and large-amplitude vibration of geometrically imperfect gradient plate, Nonlinear Dynamics, 94, 39–56, 2018 (Q1).
40. Gupta, Ankit; Talha, Mohammad, Influence of porosity on the flexural and vibration response of gradient plate using nonpolynomial higher-order shear and normal deformation theory, International Journal of Mechanics and Materials in Design, 14, 277–296, 2018 (Q1).
41. Gupta, Ankit; Talha, Mohammad, Influence of porosity on the flexural and free vibration responses of functionally graded plates in thermal environment, International Journal for Structural Stability and Dynamics, 18(1), 1–13, 2018 (Q1).
42. Gupta, Ankit; Talha, Mohammad, Influence of initial geometric imperfections and porosity on the stability of functionally graded material plates, Mechanics Based Design of Structures and Machines, 46(6), 693–711, 2018 (Q1).
43. Gupta, Ankit; Talha, Mohammad, Static and Stability Characteristics of Geometrically Imperfect FGM Plates Resting on Pasternak Elastic Foundation with Microstructural Defect, Arabian Journal for Science and Engineering, 43(9), 4931–4947, 2018 (Q2).
44. Gupta, Ankit; Talha, M., Assessment of Second Order Normal Deformation Plate Theory for Free Vibration Analysis of Functionally Graded Plates with Mixed Boundary Constraints, International Journal of Acoustics & Vibration, 23(4), 483–491, 2018 (Q3).
45. Gupta, Ankit; Talha, Mohammad, Free vibration and flexural response of functionally graded plates resting on Winkler–Pasternak elastic foundations using non-polynomial higher order Shear and Normal Deformation Theory, Mechanics of Advanced Materials and Structures, 25, 523–538, 2017 (Q2).
46. Gupta, Ankit; Talha, Mohammad, Large amplitude free flexural vibration analysis of finite element modelled FGM plates using new hyperbolic shear and normal deformation theory, Aerospace Science and Technology, 67, 287–308, 2017 (Q1).
47. Gupta, Ankit; Talha, Mohammad, Nonlinear flexural and vibration response of geometrically imperfect gradient plates using hyperbolic higher-order shear and normal deformation theory, Composites Part B: Engineering, 123, 241–261, 2017 (Q1).
48. Gupta, Ankit; Talha, Mohammad; Singh, B. N., Vibration characteristics of functionally graded material plate with various boundary constraints using higher order shear deformation theory, Composites Part B: Engineering, 94, 64–74, 2016 (Q1).
49. Gupta, Ankit; Talha, Mohammad, An assessment of a non-polynomial based higher order shear and normal deformation theory for vibration response of gradient plates with initial geometric imperfections, Composites Part B: Engineering, 107, 141–161, 2016 (Q1).
50. Gupta, Ankit; Talha, Mohammad, Recent development in modeling and analysis of functionally graded materials and structures, Progress in Aerospace Sciences, 79, 1–14, 2015 (Q1).
51. Gupta, Ankit; Joshi, A. Y.; Sharma, S. C.; Harsha, S. P., Dynamic analysis of fixed-free single-walled carbon nanotube-based bio-sensors because of various viruses, IET Nanobiotechnology, 6, 115–121, 2012 (Q3).

Other Journal/Conference Publications

1. Pachauri, Saurabh; Gupta, Naveen Kr.; Gupta, Ankit, Influence of 3D printing process parameters on the mechanical properties of polylactic acid (PLA) printed with fused filament fabrication: experimental and statistical analysis, International Journal on Interactive Design and Manufacturing (IJIDeM), 1–19, 2023 (Q2).
2. Rai, S.; Kumar, S.; Singh, R.; Gupta, A., Effect of porosity inclusions on the natural frequencies of the FGM plates using dynamic stiffness method, International Journal on Interactive Design and Manufacturing (IJIDeM), 1–8, 2022 (Q2).
3. Singh, D.; Gupta, A., Influence of geometric imperfections on the free vibrational response of the functionally graded material sandwich plates with circular cut-outs, Materials Today: Proceedings, 62, 1496–1499 (Q2).
4. Gupta, Ankit; Talha, Mohammad, Stability characteristics of porous functionally graded plate in thermal environment, IOP Conference Series: Materials Science and Engineering. DOI: 10.1088/1757-899X/330/1/012011.
5. Gupta, Ankit; Talha, Mohammad, Imperfection sensitivity of the post-buckling characteristics of functionally gradient plates using higher-order shear and normal deformation theory, IOP Conference Series: Materials Science and Engineering. DOI: 10.1088/1757-899X/330/1/012091.
6. Gupta, Ankit; Talha, Mohammad; Chaudhari, Virendra Kumar, Natural Frequency of Functionally Graded Plates Resting on Elastic Foundation Using Finite Element Method, Procedia Technology, 23, 163–170, 2016. DOI: 10.1016/j.protcy.2016.03.013.
7. Chaudhari, Virendra Kumar; Gupta, Ankit; Talha, Mohammad, Nonlinear Vibration Response of Shear Deformable Functionally Graded Plate Using Finite Element Method, Procedia Technology, 23, 201–208, 2016. DOI: 10.1016/j.protcy.2016.03.018.
8. Singh, D.; Gupta, A., Influence of geometric imperfections on the free vibrational response of the functionally graded material sandwich plates with circular cut-outs, Materials Today: Proceedings (Q2).

• S. Rai, S. Kumar, A. Gupta, A Comprehensive Review of Design and Development of Advanced Tailored Material on Sustainability Aspects, Sustainable Advanced Manufacturing and Materials Processing, 159–185, 2023.
• Ankit Gupta, Mohammad Talha, Advances in Fabrication of Functionally Graded Materials: Modeling and Analysis, Manufacturing Techniques for Materials: Engineering and Engineered, Taylor & Francis, CRC Press, 2017.
• Ankit Gupta, Functionally Graded Structures: Design and Analysis of Tailored Advanced, Composites Characterization, Testing, Measurement, and Metrology, Taylor & Francis, CRC Press, 2021.
• Yogesh Kumar, Ankit Gupta, Dheer Singh, Closed Form Solution for the Vibrational Analysis of Metal-Ceramic-Based Porous Functionally Graded Plate, Composites Characterization, Testing, Measurement, and Metrology, Taylor & Francis, CRC Press, 2021.
• A. Gupta, M. Talha, Structural Responses of Geometrically Imperfect Functionally Graded Plates with Microstructural Defects Under Hygrothermal Environment, Machines, Mechanism and Robotics, 1425–1435.
• D. Singh, Y. Kumar, A. Gupta, Bending and Free Vibration Analysis of Exponential Graded FG Plate Using Closed-Form Solution, Machines, Mechanism and Robotics, 1411–1423.

• Delivered a lecture on "Case Studies on the Design and Optimization of Additively Manufactured Parts" at Galgotias University [May 2024].
• Delivered a lecture on "Design and Optimization of Additively Manufactured Parts" at ABES College of Engineering and Technology [December 2023].
• Delivered a lecture on "Waste to Wealth: Opportunities for a Sustainable Future" at IIT Kanpur [January 2023].
• Delivered a lecture on "Analysis and Design of Advanced Composite Structures" at IIT Kharagpur [September 2019].
• Delivered a lecture on "Recent Trends in Mechanical Engineering" at Bhagwant Institute of Technology, Muzaffarnagar, Uttar Pradesh [March 2022].
• Delivered a lecture on "Perspective on Innovation: Role of Mechanical Engineers" at Adamas University, West Bengal [December 2021].
• Delivered a lecture on "Keys for a Good Researcher" at RBMI, Bareilly [June 2021].
• Delivered a lecture on "Recent Advancements in Composite Structures" at MIT Moradabad [January 2019].

1. Design, Fabrication and Characterization of Next Generation Functionally Graded Zinc Oxide (ZnO) for Thermoelectric Applications
   Funding Agency: Core Research Grant, Department of Science and Technology (DST)
   Amount: ₹45 Lakh
   Role: Co-PI
   Status: Closure report submitted
2. A Novel Electromagnetic Effect-Based Technique for Manufacturing of Polymer/MetalFe Eco-Functionally Graded Materials Using Industry Waste Materials
   Funding Agency: TARE, Department of Science and Technology (DST)
   Amount: ₹18 Lakh
   Role: PI
   Status: Ongoing
3. Revamping Efficiency of Solar Thermal System Using Advanced Composites
   Funding Agency: Dassault Systèmes
   Amount: ₹6 Lakh
   Role: PI
   Status: Completed
4. Development of a Generic Material Module for the Evaluation of Effective Properties of Thermoplastic Composites with Experimental Validation
   Funding Agency: HCL
   Amount: ₹10 Lakh
   Role: PI
   Status: Completed
5. Application of ML and AI Techniques for the Design of Steering Knuckle
   Funding Agency: HCL
   Amount: ₹7.8 Lakh
   Role: Co-PI
   Status: Completed
6. Understanding the Effect of Microstructure Evolution during Film Formation on the Properties of Bio-Polymer-Based Edible Films and Coatings
   Funding Agency: Department of Science and Technology (DST)
   Amount: ₹17 Lakh
   Role: Co-PI
   Status: Ongoing

Research Summary

• Sponsored Projects: Approx. ₹1.3 Crore
• Book Edited: 1
• Journal Publications: 50+
• International Conferences: 25+
• Patents: 3 Granted + 3 Published
• Citations: 3,200+
• h-Index: 18
• i10-Index: 39

Research Guidance

• Ph.D.: 5 Completed + 4 Ongoing
• M.Tech.: 5 Completed
• B.Tech.: 50+ Completed

• Method for Making Bale Using an Autonomous Baler, File No. 201911054464 (Indian) [Granted]
• Pedestrian Saving Bumper with Collision Activated Elevating Hood, File No. 202011033203 (Indian) [Granted]
• Self-Sustaining Hybrid Solar Water Heater Integrated with Graded Material and Panel Protection System, Patent Application No. 202111059714 [Published]
• Self-Propelling Machine for Agriculture Harvesting and the Method Thereof, Patent Application No. 202211043604 [Granted]

1. Expert Member to the Board of Studies (BoS) - Mechanical Engineering, Teerthanker Mahaveer University, Moradabad.

2. Jury member at the 9th National Level Exhibition and Project Competition (NLEPC) of INSPIRE Awards - MANAK, DST, GOI.

Peer Reviewer for several reputed international journals, including Composites Part B: Engineering, Nonlinear Dynamics, Nature, Scientific Reports, PLOS ONE, Thin-Walled Structures, and other leading journals in mechanics, materials, and structural engineering.