Faculty at School of Engineering
- B.Tech: University Institute of Engineering & Technology, CSJM University Kanpur, 2009
- M.Tech: Harcourt Butler Technological Institute, Kanpur, 2013
- PhD:Indian Institute of Technology, Kanpur, 2021
- Lecturer,University Institute of Engineering & Technology, CSJM University Kanpur, 09/2009-07/2011
- Senior Project Engineer, Indian Institiute of Technology, Kanpur, 03/2021-05/2021
- Post-doctoral Fellow, Department of Superconductors, Slovak Academy of Sciences, Bratislava, Slovakia, 11/2021-05/2024
- Assistant Professor, Department of Mechanical Engineering, School of Engineering, ShivNadar University (IOE), 07/2024-Present
Mechanics of Soft Material, Multi-physics analysis, Computational Mechanics, Non-linear elasticity, Composite Structures, Superconductors
- Gate Fellowship: MHRD, 2011
- Doctoral Fellowship: MHRD, 2013
- International Travel Grant: IIT Kanpur, 2018
- Post-doctoral Fellowship: Slovak Academy of Sciences, 2021
Published
- Arpit Kumar Srivastava and Enric Pardo. 'Modelling the mechanics of 32T REBCO Magnets through numerical simulations', Accepted-12/05/2024, Superconductor Science and Technology: DOI:10.1088/13616668/ad4a34.
- Arpit Kumar Srivastava and Sumit Basu. 'Exploring the performance of a dielectric elastomer generator through numerical simulations', Sensors and Actuators A: Physical, Volume 319, 1 March 2021, 112401.
- Arpit Kumar Srivastava and Sumit Basu. "Mechanics of reversible wrinkling in a soft dielectric elastomer", Physical Review E, Vol. 101, Iss. 4 — April 2020.
- Arpit Kumar Srivastava and Sumit Basu,'Modelling the performance of devices based on thin dielectric elas tomer membranes', Mechanics of Materials, Volume 137, October 2019, 103136.
- Ramanuja Panigrahi, Santanu K. Mishra, Arpit Kumar Srivastava, Sumit Basu,'Analysis, Design, and Implementation of an Elastomer Generator Based Energy Harvesting Scheme', IEEE Transactions on Industrial Electronics, Volume: 66 , Issue: 5 , May 2019.
Manuscripts in Preparation
Arpit Kumar Srivastava and Enric Pardo. 'Numerical exploration of Anisotropic REBCO for high field magnets', Manuscript in preparation.
Conference Presentations (As speaker only):
- Arpit Kumar Srivastava, Anang Dadhich, Philip Fazilleau and Enric Pardo, 'Modelling the effect of anisotropic elasticity of REBCO on the mechanics of high field magnets with screening currents, International Cryogenic
Engineering Conference (ICEC-ICMC2024), Geneva, Switzerland.(Abstract Accepted). - Enric Pardo, Arpit Kumar Srivastava, Anang Dadhich, Philip Fazilleau 'Multi-physics quench modelling of metal-insulated REBCO magnets with screening currents, The Applied Superconductivity Conference
(ASC 2024), Salt Lake City Utah, USA.(Abstract Submitted). - Arpit Kumar Srivastava, Enric Pardo, Philip Fazilleau 'Mechanical modeling of non-insulated REBCO high field magnets with screening currents and thermal stress, 2023 International conference in Magnet Technol-
ogy (MT-28), Aix-en-Provence, France. - Enric Pardo, Arpit Kumar Srivastava, Anang Dadhich, Philip Fazilleau 'Multi-physics modelling of metal insulated REBCO magnets with screening currents, European Conference on Applied Superconductivity,(EUCAS-2023), Bologona, Italy.
- Arpit Kumar Srivastava, Sumit Basu. 'An explicit numerical scheme for circular dielectric elastomer devices, 9th International Conference on Multiscale Materials Modeling (MMM-2018), Osaka, Japan.
- Arpit Kumar Srivastava, Sumit Basu. 'Experimental and numerical verification of a circular dielectric elastomers, 2nd International Conference on Structural Integrity and Exhibition (SICE-2018), Hyderabad, India.
Conference Publications:
- Ramanuja Panigrahi, Santanu K. Mishra, Arpit Kumar Srivastava, Sumit Basu. 'An energy harvesting scheme for dielectric elastomer generators, 2017 IEEE Energy Conversion Congress and Exposition (ECCE), Cincinnati, OH, USA.
- Arpit Kumar Srivastava, Anand Kumar. 'Comparative Study of Laminated Composite Beam Using Narrow-and Wide-Beam Criterion, Proceedings of the International Conference on Research and Innovations in Mechanical Engineering pp 1-9, springer(ICRIME-2013), Ludhiana, India.